Workshop Cabinet #2
It was about time I did some work on the workshop itself. So it was on to the 2nd quick & dirty workshop cabinet, just a small one this time it's 1250mm wide X 485mm deep X 790mm high.
It's made from one sheet of C,D faced construction ply & edged in Kwila. The door hinges were recycled from a kitchen renovation.
I needed a place to store screws & fittings so I put in a full width draw with dividers. Häfele full extension draw slides were used to maximize the usable space. I reckon it'll be enough to hold all the crap. It has the usual adjustable shelving & was finished with lacquer.
It's made from one sheet of C,D faced construction ply & edged in Kwila. The door hinges were recycled from a kitchen renovation.
I needed a place to store screws & fittings so I put in a full width draw with dividers. Häfele full extension draw slides were used to maximize the usable space. I reckon it'll be enough to hold all the crap. It has the usual adjustable shelving & was finished with lacquer.
 |
 |
 |
 |
 |